HOW TO INSTALL YOUR NEW ADDRESS NUMBERS
WE PROMISE IT'S EASY
You will receive a template with your new address to make sure the numbers are straight and with the approved spacing.
Tape the template to your wall at your chosen height. Verify the positioning of the holes before drilling, to make sure your holes aren’t on the edge of a brick, for example. Make sure it's level!
Now you're ready to drill the holes. Using the drill bit size indicated on the template, make your holes as deep as the threaded studs or you can cut them if you prefer shorter studs.
Install the studs on the back of the numbers by threading them into the metal holes. You can tighten them slightly with pliers. (Do not tighten too hard to strip the thread)
To secure the numbers onto the wall, you may want to add a drop of silicone into each hole before inserting the stud-mounted numbers.
Align all the studs to their holes and simply push the stud-mounted numbers into the holes. If you have spacers, place them on the studs before inserting.
Make sure the numbers are pushed all the way in.
YOUR NEW ADDRESS NUMBERS ARE INSTALLED.